How To Install Ondura Roofing

Are you ready to tackle a roofing project and add durability and style to your home? Look no further than Ondura roofing. In this article, we will guide you through the step-by-step process of installing Ondura roofing on your own. With a few essential tools and materials, along with our easy-to-follow instructions, you’ll be able to complete this project successfully.

First, we’ll show you how to gather everything you need and prepare the roof surface for installation.

Then, we’ll teach you how to measure and cut the panels accurately.

After that, we’ll walk you through installing the underlayment and starting with the panel installation.

Once the job is done, we’ll give you tips on cleaning up and inspecting your finished roof.

So let’s get started! By following our instructions carefully, soon enough, you’ll be enjoying all the benefits of your new Ondura roof.

Key Takeaways

  • Gather all the necessary tools and materials before starting the installation process.
  • Follow safety precautions to ensure a safe working environment.
  • Properly prepare the roof surface before installing the Ondura roofing panels.
  • Carefully measure and cut the Ondura roofing panels for accurate installation.

Gather the Necessary Tools and Materials

Now that you’ve got all your tools and materials ready to go, it’s time to start installing the ondura roofing. Before you begin, make sure you have the following items on hand:

  • A ladder
  • Measuring tape
  • Chalk line
  • Circular saw with a metal-cutting blade
  • Utility knife
  • Hammer or nail gun
  • Roofing nails or screws with rubber washers
  • Tin snips for cutting the panels to size if needed
  • Caulking gun

Once you have all your tools and materials gathered, it’s important to take safety precautions before starting the installation process. Wear gloves and safety glasses to protect yourself from any potential hazards. Also ensure that the work area is clear of any debris or obstacles.

Start by measuring the length and width of your roof to determine how many panels you will need. Use a chalk line to mark guidelines for positioning the panels evenly. Begin at one end of the roof and work your way across in rows.

To cut the panels if needed, use tin snips or a circular saw with a metal-cutting blade. Remember to always wear safety goggles when using power tools. Once you have cut any necessary panels to size, attach them using roofing nails or screws with rubber washers. Place one nail or screw in each corrugation along both sides of the panel.

Continue this process until all panels are securely attached to the roof. If there are any gaps between panels or along edges, use a caulking gun filled with an appropriate sealant to prevent moisture from seeping through.

With these steps completed successfully, congratulations! You have now installed ondura roofing onto your structure. Take some time to admire your hard work and enjoy the benefits of having durable and long-lasting roofing material protecting your home or building from weather elements for years to come.

Prepare the Roof Surface

First, ensure that the roof surface is properly prepared before beginning the installation process of Ondura roofing. This will help to ensure a smooth and successful installation. Here are five important steps to prepare the roof surface:

  • Clean the roof: Start by removing any debris, such as leaves or dirt, from the roof surface. Use a broom or leaf blower to sweep away loose particles. This will provide a clean and level base for the Ondura roofing.
  • Repair any damage: Check for any cracks, holes, or damaged areas on the roof surface. Repair these issues before installing Ondura roofing to prevent further damage and leaks in the future. Use roofing cement or sealant to patch up any problem areas.
  • Remove old shingles: If there are existing shingles on your roof, it’s essential to remove them before installing Ondura roofing. Carefully pry them off using a pry bar or shovel. Be sure not to damage the underlying structure when removing old shingles.
  • Install underlayment: Before laying down Ondura roofing sheets, it’s recommended to install an underlayment layer. This helps provide additional protection against moisture and improves insulation. Roll out the underlayment material over the entire roof surface and secure it with nails or staples.
  • Check for proper ventilation: Adequate ventilation is crucial for maintaining a healthy roof system. Make sure there are sufficient vents in place before installing Ondura roofing sheets. This will help prevent moisture buildup and extend the lifespan of your new roof.

By following these steps and ensuring that your roof surface is properly prepared, you can proceed with confidence knowing that you have set yourself up for a successful installation of Ondura roofing materials.

Read more about How to install torch down roofing

Measure and Cut the Panels

To ensure a precise fit, accurately measuring and cutting the panels is essential for a successful installation of Ondura roofing materials. Before you begin, make sure you have all the necessary tools on hand: a tape measure, a straight edge or square, and a sharp utility knife.

Start by measuring the length of your roof from one end to the other. Use your tape measure to get an accurate measurement and write it down.

Next, measure the width of the roof at various points along its length. This will help you determine if there are any irregularities in the roof’s shape that need to be accounted for.

Once you have your measurements, it’s time to cut the panels. Lay them out on a flat surface and mark your measurements using a straight edge or square. Make sure to double-check your measurements before making any cuts to avoid costly mistakes.

Using a sharp utility knife, carefully score along your marked lines. Apply firm pressure but be cautious not to cut too deeply into the panel. After scoring, bend the panel back and forth until it snaps cleanly along the scored line.

Repeat this process for each panel until you have enough pieces to cover your entire roof. Remember to account for any overlaps or gaps as specified in the manufacturer’s instructions.

By taking your time with accurate measurements and precise cuts, you’ll ensure that each panel fits perfectly into place during installation. This will result in a professional-looking finish that will protect your home from the elements for years to come.

Install the Underlayment

Once you’ve measured and cut the panels, it’s time to lay down the underlayment for added protection before installing your new roof. The underlayment acts as a barrier against moisture, preventing any water from seeping into your roofing materials and causing damage to your home.

To begin, start at the bottom edge of the roof and roll out the underlayment horizontally along the length of the roof. Make sure there is an overlap of at least 4 inches between each row to ensure complete coverage.

Secure the underlayment using roofing nails or staples, placing them approximately every 6-8 inches along the edges and in a grid pattern across the field. Pay special attention to areas such as valleys and ridges where water tends to accumulate more easily. Be careful not to overdrive or underdrive the fasteners, as this can compromise their effectiveness.

As you continue installing the underlayment, make sure to avoid any wrinkles or creases by smoothing it out with your hands or a broom. This will help create a smooth surface for your roofing materials to adhere to.

Once you’ve finished laying down the underlayment on one side of the roof, repeat the process on the other side until both sides are completely covered. Double-check that all seams are properly overlapped and sealed with an adhesive if required by your specific roofing system.

Installing an underlayment is an essential step when it comes to ensuring a durable and long-lasting roof. By following these steps carefully, you’ll be well on your way to successfully installing your new Ondura roofing system while providing additional protection for your home against potential damage caused by moisture infiltration.

Start Installing the Panels

Now it’s time to dive into the exciting part – getting those panels up on your roof! Installing the Ondura roofing panels is not as daunting as it may seem. With a little patience and attention to detail, you’ll have a beautiful and durable roof in no time.

Before you start, make sure you have all the necessary tools and materials handy. This includes Ondura screws, a drill with a screwdriver bit, a tape measure, and a ladder or scaffolding for access to the roof. Once you’re prepared, follow these steps:

  1. Positioning: Begin by placing the first panel at the bottom edge of the roof, ensuring it overhangs slightly to allow for water runoff. Align it with chalk lines or existing shingles to maintain straightness.
  2. Fastening: Securely attach the panel using Ondura screws placed through the pre-drilled holes along both sides of each corrugation. Make sure not to overtighten, as this can cause damage.
  3. Overlapping: For subsequent panels, overlap them with the previous one by at least one corrugation (about six inches). Use additional screws along the overlapping edges for extra stability.
  4. Trimming: If needed, trim any excess length from panels using tin snips or a circular saw with an appropriate blade. Take care to remove any metal filings afterward.

To give you an idea of how many panels you’ll need based on your roof size, refer to this table:

Roof SizeNumber of Panels
Up to 100 sqft10
Up to 200 sqft20
Up to 300 sqft30
Up to 400 sqft40

Remember that proper installation is crucial for optimal performance and longevity of your Ondura roofing system. Take your time, follow the instructions carefully, and enjoy the satisfaction of a job well done!

Secure the Panels

To secure the panels, you’ll need to use roofing screws or nails. Make sure to place them at the recommended spacing and locations. This will ensure that the panels are securely fastened and won’t come loose in high winds or other extreme weather conditions.

Use roofing screws or nails to attach the panels

To securely attach the panels, use roofing screws or nails. Here’s how:

  1. Position the panel on the roof, ensuring it aligns correctly with adjacent panels.
  2. Start at one end of the panel and insert a screw or nail through the pre-drilled holes provided by Ondura.
  3. Continue attaching screws or nails along the edges of the panel, spacing them approximately 12 inches apart.

Make sure to apply enough pressure while fastening to securely hold the panels in place without damaging them.

Remember to use Ondura-approved fasteners for optimal performance and longevity.

As you work your way across each row, double-check that each panel is properly aligned and securely attached before moving on to the next one.

With proper installation, your Ondura roofing will provide long-lasting protection for your home.

Place them at the recommended spacing and locations

Position the panels at the recommended spacing and locations to ensure proper installation and optimal performance. Start by marking the recommended locations for panel placement on the roof using a chalk line or measuring tape.

This will help guide you when it’s time to attach the panels. Make sure to follow the manufacturer’s instructions for panel spacing, as it may vary depending on your specific roofing project. Typically, this will involve leaving a small gap between each panel to allow for expansion and contraction with temperature changes.

Additionally, be mindful of any obstructions such as vents or chimneys that may require special attention when positioning the panels. By taking these steps, you can ensure that your Ondura roofing is installed correctly and will provide long-lasting protection for your home.

Install Flashing and Ridge Caps

To properly secure your Ondura roofing panels, it’s important to add flashing around any roof penetrations. This will prevent water from seeping in and causing damage.

Additionally, make sure to install ridge caps at the peak of the roof. This provides extra protection and gives a finished look to your roof.

By following these steps, you can ensure a secure and durable roofing installation.

Add flashing around roof penetrations

To achieve a professional-looking installation, it is important to add flashing around roof penetrations when installing ondura roofing. Roof penetrations, such as pipes, vents, and chimneys that protrude through the roof surface, need to be properly protected to prevent water infiltration and potential leaks. Here are the steps to follow:

  1. Measure the diameter of the penetration and cut a piece of flashing that is slightly larger for adequate coverage.
  2. Apply a layer of roofing cement around the base of the penetration.
  3. Place the flashing over the area and press it down firmly to create a secure seal.
  4. Use roofing nails or screws to secure the edges of the flashing in place.

Remember, adding flashing around roof penetrations is crucial to ensure the durability and watertightness of your ondura roofing installation.

Install ridge caps at the peak of the roof

Ready to take your roof installation to the next level? Add a professional touch by installing ridge caps at the peak of your roof. Ridge caps are essential for providing a watertight seal and protecting against wind damage. Follow these simple steps to install ridge caps and ensure a durable and long-lasting roof.

First, gather all the necessary materials and tools, including ridge caps, roofing nails, and a hammer. Begin by positioning the first ridge cap at one end of the roof peak. Align it with the edge of the roof and secure it in place using roofing nails.

Next, overlap each subsequent ridge cap with the previous one by about 6 inches. This will create an effective barrier against water infiltration. Continue securing each cap with roofing nails until you reach the opposite end of the roof.

Finally, use roofing cement or adhesive to seal any gaps between the ridge caps for added protection against leaks. And that’s it! You’ve successfully installed ridge caps on your ondura roofing system.

1Position first ridge cap at one end of the roof peak
2Secure in place using roofing nails
3Overlap subsequent ridge caps by 6 inches
4Secure each cap with roofing nails
5Seal gaps between caps with roofing cement or adhesive

By following these steps and adding ridge caps to your ondura roofing, you’ll not only enhance its durability but also give it a polished and professional appearance.

Seal and Waterproof the Roof

Before you begin installing the Ondura roofing, make sure to seal and waterproof the roof for added protection against leaks. This step is crucial to ensure that your roof withstands harsh weather conditions and remains durable over time.

To start, gather all the necessary materials such as a high-quality roofing sealant, a brush or roller for application, and a clean cloth for wiping off any excess sealant.

Begin by inspecting the entire roof surface for any cracks, gaps, or damaged areas that could potentially lead to leaks. It’s important to repair these issues before proceeding with the sealing process.

Next, thoroughly clean the roof surface using a broom or blower to remove any debris or dirt. This will ensure proper adhesion of the sealant.

Once cleaned, apply a generous amount of roofing sealant along all seams and edges of the roof. Be sure to work in small sections at a time and spread the sealant evenly using a brush or roller.

Pay special attention to areas where different materials meet, such as chimneys or vents, as these are common areas for leaks to occur. Apply an extra layer of sealant around these spots for added protection.

After applying the sealant, allow it ample time to dry according to manufacturer instructions. Once dried, inspect the sealed areas again for any missed spots or uneven application. Touch up any imperfections with additional sealant if necessary.

By taking the time to properly seal and waterproof your roof before installing Ondura roofing panels, you are ensuring maximum protection against leaks and extending the lifespan of your new roof. So don’t skip this important step!

Clean up and Inspect the Finished Roof

To ensure the longevity and effectiveness of your newly installed roof, it’s important to thoroughly clean up any debris or waste materials left behind during the installation process. Take the time to remove any loose nails, shingles, or other objects that could potentially cause damage.

After cleaning up, inspect the finished roof for any visible issues or defects. Look for missing shingles, gaps in flashing, or signs of water damage. It’s crucial to address these issues promptly to prevent further damage.

Remove any debris or waste materials

To create a clean and safe environment for installing the ondura roofing, it is important to remove any debris and waste materials. Start by clearing away all loose shingles, nails, or other objects that may be lying on the roof surface.

Next, use a broom or rake to sweep away dirt, leaves, and branches. This will help ensure that the roof is free from any potential obstructions.

Proper disposal of all waste materials is crucial to prevent them from obstructing the installation process or causing damage later on. Make sure to dispose of them properly according to local regulations.

Remember to wear gloves and protective eyewear while handling sharp objects or hazardous materials. This will help protect you from any potential injuries.

Lastly, keep in mind that having a clean workspace is essential for a smooth installation and to improve the durability of your new ondura roof.

Inspect the roof for any visible issues or defects

Now that you’ve cleared away all the debris and waste materials from your roof, it’s time to move on to the next step: inspecting the roof for any visible issues or defects.

This crucial step ensures that your new Ondura roofing is installed on a solid foundation, free from any existing problems.

Take a close look at your roof and keep an eye out for cracked or damaged shingles, loose nails, or any signs of water damage.

If you spot any issues, make sure to address them before proceeding with the installation.

By thoroughly inspecting your roof beforehand, you can ensure that your Ondura roofing will provide maximum protection and longevity for years to come.

Maintain and Care for Your Ondura Roofing

To maintain and care for your Ondura roofing, it’s important to regularly check for any damage or loose panels. This will help ensure the integrity of your roof and prevent any potential leaks.

Additionally, make sure to clean the roof surface as needed to prevent debris buildup, which can cause damage over time.

Regularly check for damage or loose panels

Check for any damage or loose panels on your Ondura roofing to ensure its long-lasting durability and protect your home from potential leaks. Regularly inspecting your roof is crucial in maintaining its integrity and avoiding costly repairs down the line. Here’s a helpful table to guide you through the inspection process:

Signs of DamageAction
Cracks or splits in panelsReplace damaged panels immediately to prevent water penetration
Loose fasteners or nailsTighten them securely to keep panels in place
Missing screws or washersReplace with new ones to maintain structural stability

By conducting these checks at least twice a year, preferably during spring and fall, you can identify any issues early on and address them promptly. Remember, proactive maintenance is key to maximizing the lifespan of your Ondura roofing and safeguarding your home against potential water damage.

Clean the roof surface as needed to prevent debris buildup

Regularly cleaning the roof surface is essential to prevent debris buildup and maintain the longevity of your Ondura roof. To clean the roof, start by using a broom or leaf blower to remove loose debris such as leaves, branches, or dirt. Be gentle to avoid damaging the roofing panels. Next, rinse off any remaining dirt or grime using a garden hose with a spray nozzle attachment. Start from the top and work your way down, focusing on one section at a time. If you encounter stubborn stains or moss growth, mix a mild detergent with water and gently scrub the affected area using a soft brush. Rinse thoroughly afterwards. Remember to exercise caution when working on the roof and consider hiring professionals if needed.

Consider Professional Installation Assistance

If you’re unsure or uncomfortable with DIY installation, it’s important to seek professional help when installing your Ondura roofing.

Professional installation ensures that the roofing is properly installed and will be covered by warranty.

Don’t hesitate to reach out for assistance if you want to ensure a successful and worry-free installation process.

If you’re unsure or uncomfortable with DIY installation

If you’re unsure or uncomfortable with DIY installation, don’t worry. There are professional roofers who can help you out. Hiring a professional to install your Ondura roofing can give you peace of mind and ensure that the job is done correctly.

Roofing experts have the necessary skills, experience, and tools to handle the installation process efficiently and safely. When choosing a professional roofer, make sure to do some research and select someone reputable. Look for contractors who specialize in installing Ondura roofing or have experience working with similar materials.

You can ask for recommendations from friends, family, or neighbors who have recently had their roofs installed. By hiring a professional roofer, you can save yourself time and effort while also avoiding potential mistakes that could lead to costly repairs down the line.

So, don’t hesitate to reach out for assistance if you’re unsure about tackling the installation on your own.

Seek professional help to ensure proper installation and warranty coverage

Hiring a professional roofer ensures that your installation is done correctly, giving you the peace of mind and warranty coverage you deserve. Ondura recommends seeking professional help for a few reasons. First, professionals have the experience and expertise to handle the installation process efficiently and effectively. They know the best practices to avoid common mistakes that could compromise the roof’s performance or void the warranty. Second, professionals are equipped with the necessary tools and equipment to complete the installation accurately. Finally, hiring a professional roofer saves you time and effort, allowing you to focus on other important tasks. To help illustrate these benefits, here is a visual representation:

Benefits of Hiring a Professional Roofer
Proper Tools

Enjoy the Benefits of Your Ondura Roofing

Experience all the advantages of your new Ondura roofing and enjoy a worry-free, long-lasting solution for your home. With Ondura roofing, you can say goodbye to constant maintenance and hello to more time spent doing things you love.

The benefits of Ondura roofing go beyond just its durability – it also offers exceptional protection from the elements.

One major advantage of Ondura roofing is its lightweight design. This makes installation a breeze and reduces the strain on your home’s structure. You won’t have to worry about any additional stress or damage caused by heavy materials. Plus, the lightweight nature of Ondura roofing makes it easier to transport and handle during the installation process.

Another benefit is its resistance to extreme weather conditions. Whether it’s scorching sun, heavy rain, or strong winds, your Ondura roof can withstand it all. It has been specifically engineered to endure harsh climates, ensuring that your home remains protected year-round.

Additionally, Ondura roofing provides excellent insulation properties. It helps keep your home cool in the summer and warm in the winter, reducing energy costs and making your living space more comfortable throughout the year.

Furthermore, with Ondura roofing comes peace of mind knowing that you are backed by a reliable warranty. This assures you that if any issues arise during the lifespan of your roof, you’ll be covered for repairs or replacements.

In conclusion, installing an Ondura roof not only guarantees a durable solution but also offers numerous benefits such as easy installation, resistance to extreme weather conditions, superior insulation properties, and reliable warranty coverage. Get ready to experience all these advantages and enjoy a worry-free future with your new Ondura roofing!

Frequently Asked Questions

How much does Ondura roofing cost?

Ondura roofing costs vary depending on the size and style of the roof. Prices typically range from $20 to $40 per sheet. Contact local suppliers or visit their website for more accurate pricing information.

Can Ondura roofing be installed over existing shingles?

Yes, Ondura roofing can be installed over existing shingles. It saves you time and money by eliminating the need to remove the old roof. Just make sure to follow the manufacturer’s guidelines for installation.

What is the lifespan of Ondura roofing?

The lifespan of Ondura roofing is typically around 25 to 30 years. It provides durability and resistance to extreme weather conditions, making it a reliable choice for long-term protection for your home.

Are there any special considerations for installing Ondura roofing in extreme weather conditions?

In extreme weather conditions, it’s crucial to take extra precautions when installing Ondura roofing. Ensure proper sealing to prevent leaks and reinforce the installation to withstand strong winds or heavy snow loads.

Can I walk on Ondura roofing once it is installed?

Yes, you can walk on Ondura roofing once it’s installed. However, be cautious and distribute your weight evenly to avoid damaging the panels. Make sure to follow safety guidelines provided by Ondura for walking on the roof.


In conclusion, you’ve successfully installed your Ondura roofing by following the step-by-step instructions. Here’s a recap of the process:

  1. Gather the necessary tools and materials.
  2. Prepare the roof surface by removing any existing roofing and ensuring it’s clean and dry.
  3. Measure and cut the panels to fit the dimensions of your roof.
  4. Install the underlayment, ensuring it’s properly secured and provides a waterproof barrier.
  5. Begin installing the panels, starting from the bottom and working your way up.
  6. Secure each panel with nails or screws, following the manufacturer’s guidelines.
  7. Repeat the process until all panels are installed, ensuring they overlap properly.
  8. Clean up any debris and inspect your finished roof regularly to maintain its quality.
  9. If needed, don’t hesitate to seek professional installation assistance.

Enjoy the benefits of your Ondura roofing for years to come!

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.